brother

Turn off the printer. Make sure that the front cover is closed and the power cord is plugged in. -Hold down the Go button as you turn the power switch on. -Keep the Go button pressed down until the Toner, Drum and Error LEDs light up.…

The issue is the "Replace Toner" message appeared on the screen and won't allow any prints or copy. Here is the solution: Press Menu button: Options will appear, press ok for the option 1. General Setup Go down by the arrow key to…

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…

Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display Drum Unit, and then press OK. Press the Up arrow key to reset the drum counter. Close the front cover of the…

This procedure is required when the toner is changed and machine is showing the message "Change the toner cartridge" or "Install toner", then you must to do this steps: - Open cartridge door, hold invisible # key for 5 seconds, reset…

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…