sharp

By default, on this models, USB port (B type) is disabled. You must to enter in the simultation mode. Machine must be in Copy mode: key -> key -> key -> key -> 26 -> Start -> 50 -> Start -> 3 Start -> 1 Start.…

In this video, I will show you how to change the paer size in the tray 1 and bypass tray on Sharp MFU, AR-6020 series: https://www.youtube.com/watch?v=iK9a7mOLEoM Subscribe to my chanel for more usefull tips and tricks. Thank you!

E7 01 Duplex model memory error/ Image data error Detail: 1. The memory capacity for the duplex model machine is wrong. Insufficient memory capacity. 2. Duplex setting is set for a single surface model. Cause: 1. The memory capacity on…

AR-M550/620/700 - Enter the simulation by pressing touch key # * C * than type 14, Start, 1, Start. The machine will turn off than on. If the code is still displayed you have the functional problem - the fusing motor is locked. Try to…

When the warning light (on Start button) is just blinking on Sharp AR 6020/6023 series and you can't do copy buth you can print, then exposer is not working properly or copy board is dirty. Clean all surface in optical mirrors. That's all.…

When the machine displays an error code (Call for servise XX-XX) there is a functional problem with the machine. Sometimes the code can be cleared by turning the machine off for a minute and then powering the machine back up. When powering…